Axi · Сквозной — фон контента (skin) · 16 кат.Axi · Сквозной — фон контента (skin) · 16 кат.

Student Builds a Working 3D Printer 92% from LEGO

• Evgenia Sliv (edited: )
Student Builds a Working 3D Printer 92% from LEGO

Adam Turaj, a mechatronics engineering student at the University of Waterloo, developed a working 3D printer called Studprint, which primarily uses LEGO parts in its construction. According to the author, they make up 92% of the device's components. The total cost of the components is estimated at $173.35, with about $30 spent on the LEGO set itself.

How the Studprint 3D Printer Works

Turaj designed the device in SOLIDWORKS, striving to use classic LEGO bricks instead of Technic series elements wherever possible. The frame, movable table, portal, and some mechanical components, including lead screws, are assembled from the LEGO set.

The name Studprint is related to the English word 'stud'—the protrusions on the surface of LEGO bricks that allow pieces to connect with each other.

The printer uses standard electronics typical for DIY 3D printing devices. Key components include:

  • Control board BTT SKR Pico V1.0

  • Single-board computer Raspberry Pi Zero 2 W

  • Power supply Mean Well LRS-150-24

  • Five stepper motors NEMA 17

  • Printing unit Trianglelab V6

Four motors are responsible for moving the mechanisms, while the fifth is used for feeding the plastic filament. According to the published description, there are 13 components in the design that are not related to LEGO.

The functionality of Studprint is confirmed by printing a test model of the Benchy boat, which is used to assess the quality of 3D printers. Under the control of Klipper software, the device completed the print in about 1 hour and 15 minutes.

However, the published results do not yet allow for an assessment of the printer's long-term reliability and accuracy when producing more complex objects.

How the Project Came About

Studprint was created as part of the Infill competition organized by Hack Club. Participants were invited to independently develop a 3D printer, with a grant of $350 provided for purchasing components.

Turaj decided to challenge himself further by replacing standard construction elements with LEGO parts as much as possible. His project was among those selected to present their developments at the Rocky Mountain RepRap Festival 2026.

The author has made Studprint materials available on GitHub, including CAD models and a list of components. This allows other developers to study the printer's design and use the project in their own experiments.

The indicated assembly cost is approximate: final expenses may vary depending on the prices and availability of components.

This material is prepared solely for informational purposes and does not constitute financial advice or a recommendation.

Popular news